Short answer: a softener is sized by the grains of hardness it must remove between regenerations. Multiply the people in the home by their daily water use and by the water’s hardness in grains per gallon (add 5 grains per gallon for each ppm of dissolved iron), then multiply by the days you want between regenerations. The softener’s rated capacity at the salt dose you plan to use should be at least that number.

A bigger resin tank does not raise the grain rating by itself. Capacity also depends on the salt dose: a model rated at about 14,000 grains at a low dose is rated for about 48,000 at its highest, and the higher dose uses far more salt per grain. The calculator shows all three doses so you can see that trade.

Calculator

Softener size calculator

Rated capacity by salt dose

Whirlpool WHES30, WHES33, WHES40, WHES44 and WHES48 only. Other makers are not yet in this table. Capacity is the grains of hardness a model treats between regenerations at that salt dose, as printed in the maker's manual. As an Amazon Associate, we earn from qualifying purchases. The links below are Amazon searches, not verified product pages.

ModelResin (cu ft)Low doseMedium doseHigh doseMax hardness / clear ironSourceAmazon
Whirlpool WHES300.8212,500 grains at 2.4 lb26,600 grains at 7.8 lb31,700 grains at 13.1 lb95 gpg / 8 ppm Whirlpool WHES30/WHES33 owner's manual (7392301), Specifications & Performance Claims Search Amazon for Whirlpool WHES30
Whirlpool WHES330.8813,400 grains at 2.6 lb28,500 grains at 8.3 lb34,100 grains at 14.1 lb105 gpg / 9 ppm Whirlpool WHES30/WHES33 owner's manual (7392301), Specifications & Performance Claims Search Amazon for Whirlpool WHES33
Whirlpool WHES401.1411,900 grains at 2.4 lb31,600 grains at 9 lb40,000 grains at 15.5 lb125 gpg / 10 ppm Whirlpool WHES40/WHES44 owner's manual (7335139), Specifications & Performance Claims Search Amazon for Whirlpool WHES40
Whirlpool WHES441.2313,000 grains at 2.6 lb34,800 grains at 9.7 lb44,000 grains at 16.7 lb140 gpg / 12 ppm Whirlpool WHES40/WHES44 owner's manual (7335139), Specifications & Performance Claims Search Amazon for Whirlpool WHES44
Whirlpool WHES481.3314,300 grains at 2.8 lb37,900 grains at 10.5 lb48,000 grains at 18.1 lb160 gpg / 12 ppm Whirlpool WHES48 owner's manual (7332911), Specifications & Performance Claims Search Amazon for Whirlpool WHES48

Formula and sources

  • Daily grains = people x gallons per person per day x (hardness in grains per gallon + 5 x ppm of clear-water iron).
  • Days between regenerations = capacity at the chosen salt dose / daily grains. Salt per 30 days = salt per regeneration x 30 / days between regenerations.
  • Gallons per person: USGS Water Science School: How much water do I use at home each day?, which says "Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses."
  • Iron compensation: Whirlpool WHES48 owner's manual, iron section says to "add 5 grains to the hardness setting for every 1 ppm of Ferrous (clear water) iron." The same rule appears in the WHES30/33 and WHES40/44 manuals.
  • Unit conversion: 1 grain = 64.8 mg and 1 US gallon = 3.785 L, so 1 grain per gallon = 17.1 mg/L as calcium carbonate.
  • Capacities, resin volume and hardness and iron limits: the Whirlpool owner's manuals linked in the table, checked November 8, 2026.

Assumptions: all water you soften passes through the softener, use is steady, iron is dissolved (a softener does not remove ferric or bacterial iron), and the softener regenerates at the dose you pick. Your own manual and installer settings win over this estimate. Nobody here has tested these softeners.

Worked examples

Four people, 10 grains per gallon, no iron, 7 days between regenerations. 4 x 80 x 10 = 3,200 grains per day, so 7 days needs 22,400 grains. In the table the Whirlpool WHES30 reaches 26,600 grains at its 7.8 lb dose, about 8.3 days between regenerations and about 28 lb of salt per 30 days. At its 2.4 lb dose it holds 12,500 grains, only about 3.9 days.

The same home with 2 ppm of dissolved iron. Iron adds 2 x 5 = 10 grains per gallon, so the load is 4 x 80 x 20 = 6,400 grains per day and 7 days needs 44,800 grains. Only the WHES48 at its 18.1 lb dose (48,000 grains) reaches 7 days, at about 72 lb of salt per 30 days. Treating the iron at its source, or accepting a shorter interval, changes the answer a lot.

What the numbers mean

  • Hardness. Use your utility’s report or a test. Our hardness table lists published figures for several large systems and opens this calculator with the number filled in.
  • Gallons per person. USGS says each person uses about 80 to 100 gallons per day for indoor use. Count only water that passes through the softener; a bypassed outdoor tap does not add to the load.
  • Iron. Whirlpool’s manuals tell owners to add 5 grains to the hardness setting for every 1 ppm of dissolved (clear-water) iron. They also say the softener does not remove ferric (red-water) or bacterial iron, and they give a maximum clear-water iron for each model.
  • Salt. Salt per regeneration comes from the dose you choose. For how much salt to keep in the tank, use our salt calculator . For choosing a model, see the low-upkeep softener list .

What this calculator does not cover

The table lists only the Whirlpool models above, because their manuals print capacity at three salt doses. Other makers publish capacity differently, often as one rating at a stated dose. For another softener, compare the grains per day and the capacity needed shown above with the capacity in that model’s manual at the dose you will use. No other maker’s figures are included until they are confirmed from a manual or spec sheet.

Sources

Capacities were checked against the manuals on November 8, 2026. This is desk research; Better Water Guide has not tested these softeners.