Short answer: a utility’s own water quality report is the best place to look up tap hardness. This table collects the numbers from those reports for several large US systems, with the report linked on every row, so you can read the original. Hardness is shown in mg/L as calcium carbonate; grains per gallon is that figure divided by 17.1.

Data table

Hardness by water system

Coverage: 9 water systems so far, each read from the utility's own report. This is not yet the 100 largest US systems, and rows are not ranked by size. Blank cells mean the report does not publish that number. 1 grain per gallon = 17.1 mg/L as calcium carbonate. Grains per gallon in the table are calculated from mg/L unless the report states them.

Water systemStateAverage (mg/L)Low to high (mg/L)Average (gpg, calculated)Report and yearNotesSize a softener
Austin WaterTX 93 70 to 126 5.4 2025 Water Quality Report (Consumer Confidence Report) Report gives 93 ppm (5.4 gpg) average, 70 to 126 ppm (4.1 to 7.4 gpg). Open calculator at 93 mg/L
DC WaterDC 126 78 to 175 7.4 2025 Drinking Water Quality Report (2024 results) Report gives 126 ppm (7 gpg) average, 78 to 175 ppm (5 to 10 gpg). Open calculator at 126 mg/L
Denver WaterCO 105 55 to 124 6.1 2026 Water Quality Report (2025 results) Report lists total hardness in ppb (average 105,009; range 55,000 to 124,000); shown here as mg/L (1 mg/L = 1,000 ppb). Southern and northern collection systems differ. Open calculator at 105 mg/L
Fort Worth WaterTX 107 to 183 2021 Water Quality Report Report gives a range only: 107 to 183 ppm (6 to 11 gpg). Older report year; newer one not confirmed.
Columbus Division of WaterOH 83 to 134 2023 Consumer Confidence Report Three plants: Dublin Road 125 ppm average (121 to 134), Hap Cremean 92 (83 to 104), Parsons Avenue 123 (121 to 124). Range shown is the span across all three. Older report year.
Las Vegas Valley Water DistrictNV 280 16.4 2026 Water Quality Summary Summary lists an average value of 280 ppm; no range given. Open calculator at 280 mg/L
Los Angeles Department of Water and PowerCA 93 to 291 2022 Drinking Water Quality Report Monitoring table lists six supply columns with averages from 103 to 279 mg/L; range shown spans all six. Column labels were not confirmed, so check the report for your area. Older report year.
City of SacramentoCA 83 4.9 2025 Consumer Confidence Report Hardness row (2023 to 2025) reads 83, 34, 63 and 15 to 154 mg/L; 83 is the first column, labeled system average. Surface-water and groundwater areas differ a lot. Open calculator at 83 mg/L
Philadelphia Water DepartmentPA 2022 Water Quality Report Report shows hardness only as a chart by plant (Belmont, Queen Lane, Baxter) and calls the water moderately hard to hard. No numbers published, so none shown.

Hardness varies by neighborhood, source and season. Your own tap can differ from the system figure, so test your water or ask your utility. Rows without a published average have no calculator link. Last checked November 8, 2026.

How the rows were built

  • Source. Every row comes from a report the utility publishes (a Consumer Confidence Report or equivalent water quality report). No row uses a water-softener seller’s page, a review site or a crowd-sourced map.
  • Checking. After the first pass, each number was read again in the linked report. Where a report did not print a number, the cell is blank. Philadelphia’s report, for example, shows hardness only as a chart, so no number is given.
  • Coverage. The table has 9 systems so far. It is not yet the 100 largest US systems and is not ranked. Systems are added only when their report can be read and confirmed. Several report years are older than the latest because that is the latest version we could read.
  • Meaning of the range. A system with several plants or wells can have very different hardness by neighborhood. The range shows the span the report prints; your tap may sit anywhere in it.

Using the number

The hardness classes used by the US Geological Survey are soft (0 to 60 mg/L), moderately hard (61 to 120), hard (121 to 180) and very hard (over 180). To size a softener, open the softener size calculator from a row, or test your own water . Our guide to reading a water quality report explains the other lines in these reports.

Sources

Each row links its own report. Conversion and classes: USGS, Hardness of water . Grains per gallon is calculated as mg/L divided by 17.1 (1 grain = 64.8 mg; 1 US gallon = 3.785 L).